StayAtHomeAndTuneYourCar

kdFi

Close filters
 
  •  
from to
1 From 3
No results were found for the filter!
kdFi V1.4 PNP BMW M40 kdFi V1.4 PNP BMW M40
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for M40 engines. Customer to do: - Replace Throttle Position Switch with Throttle Position Sensor e.g. from M50 engine (not included in delivery) -...
From €449.10 * €499.00 *
kdFi V1.4 PNP BMW S38B36 kdFi V1.4 PNP BMW S38B36
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for S38B36 engines. Customer to do: - Replace Throttle Position Switch with Throttle Position Sensor e.g. from M50 engine (not included in...
From €449.10 * €499.00 *
kdFi V1.4 PNP BMW S38B38 kdFi V1.4 PNP BMW S38B38
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for S38B38 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €449.10 * €499.00 *
kdFi V1.4 PNP BMW M43 kdFi V1.4 PNP BMW M43
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for M43 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €449.10 * €499.00 *
kdFi V1.4 PNP VW 2H (1,8l) kdFi V1.4 PNP VW 2H (1,8l)
The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for 2H engines. The MAP sensor is good up to 1,5 bar boost and can be replaced by a 3 bar sensor if needed Customer to do: - Change Engine Management -...
From €449.10 * €499.00 *
kdFi V1.4 PNP VW AAA (VR6) kdFi V1.4 PNP VW AAA (VR6)
The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for VR6 AAA engines with distributor. NOT for AAA with wasted spark - please use ABV ECU Customer to do: - Change Engine Management - START ENGINE ! - do...
From €449.10 * €499.00 *
kdFi V1.4 PNP VAG ABF (2,0l 16V) kdFi V1.4 PNP VAG ABF (2,0l 16V)
The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for 2,0l 16V (ABF) engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with...
From €449.10 * €499.00 *
kdFi V1.4 PNP BMW M60 kdFi V1.4 PNP BMW M60
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for M60 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €449.10 * €499.00 *
kdFi V1.4 Modul kdFi V1.4 Modul
The new kdFi V1.4 (MS2 based) is a improved version of the V1.3 with all our experiance of the last 5 years: - dimensions 60mm x 88mm - no heat sink needed - designed as Daughterboard (Eagle library will be published for own projects) -...
€224.10 * €249.00 *
kdFi V1.4 mit Gehäuse kdFi V1.4 mit Gehäuse
The kdFi is a universal programmable Engine Management System for ignition and fuel injection on MSextra Base (MS2 V3.0) which is a full replacement for the original EFI System. The fuel calculation options can be switched by the free...
From €359.10 * €399.00 *
kdFi V1.4 Basis kdFi V1.4 Basis
The kdFi is a universal programmable Engine Management System for ignition and fuel injection on MSextra Base (MS2 V3.0) which is a full replacement for the original EFI System. The fuel calculation options can be switched by the free...
€269.10 * €299.00 *
kdFi V1.4 PNP BMW M50 kdFi V1.4 PNP BMW M50
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for M50 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €449.10 * €499.00 *
1 From 3
Viewed