No results were found for the filter!
kdFi V1.4 mit Gehäuse The kdFi is a universal programmable Engine Management System for ignition and fuel injection on MSextra Base (MS2 V3.0) which is a full replacement for the original EFI System. The fuel calculation options can be switched by the free...
From €399.00 *
kdFi V1.4 PNP BMW M50 The kdFi V1.4 is mounted and wired in a Motronic compatible housing and loaded with an initial setup for M50 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup The control unit can be used on the...
From €499.00 *
kdFi V1.4 Modul - dimensions 60mm x 88mm - no heat sink needed - designed as Daughterboard (Eagle library will be published for own projects) - layouted by a specialized company - DC isolated USB connection (Bluetooth Option) - two seperate self...
€249.00 *
kdFi V1.4 PNP Opel C20XE The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for C20XE engines. (Motronik 2.8 without distributor) Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product...
From €499.00 *
kdFi V1.4 PNP Opel C20LET The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for C20LET engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €499.00 *
kdFi V1.4 PNP VAG AEB (1,8t) The kdFi V1.4 is mounted and wired in a 1,8t housing and loaded with an initial setup for AEB (1,8t) engines. ONLY suitable for the ECU with 2 connectors! Please check photo above Customer to do: - Change Engine Management - START ENGINE...
From €499.00 *
kdFi V1.4 PNP VAG AGU (1,8t) The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for AGU (1,8t) engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with special...
From €499.00 *
kdFi V1.4 PNP VW AAA (VR6) The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for VR6 AAA engines with distributor. It can be used for both the 2.8l and the 2.9l, but ONLY with distributor. NOT for AAA with wasted spark - please...
From €499.00 *
kdFi V1.4 PNP VW PG (G60) The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for G60 (PG) engines. The MAP sensor is good up to 1,5 bar boost and can be replaced by a 3 bar sensor if needed. Customer to do: - Change Engine...
From €499.00 *
kdFi V1.4 PNP VW PY (G40) The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for G40 (PY) engines. The MAP sensor is good up to 1,5 bar boost and can be replaced by a 3 bar sensor if needed. Customer to do: - Change Engine...
From €499.00 *
kdFi V1.4 PNP BMW M52TU The kdFi V1.4 is mounted and wired in a original housing and loaded with an initial setup for M52TU (E46 E39) engines. The following features are currently not supported: Air conditioning, vehicle stability programs, no communication...
From €499.00 *
kdFi V1.4 PNP BMW M50TU The kdFi V1.4 is mounted and wired in a Motronic compatible housing and loaded with an initial setup for M50TU engines. (with Vanos) Compatible only with Bosch ECUs! Customer to do: - Change Engine Management - START ENGINE ! - do your...
From €499.00 *
Viewed