No results were found for the filter!
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M50TU engines. (with Vanos) Compatible only with Bosch ECUs! The control unit can be used for the following Bosch Motronic: 0 261 200 413 If...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M60 engines. The control unit can be used for the following Bosch Motronics: 0 261 200 404 0 261 203 484 If your number is not listed,...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M42 engines. The control unit can be used for the following Bosch Motronics: 0 261 200 175 0 261 200 950 0 261 203 281 0 261 203 590 If your...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M50 engines. The control unit can be used on the M50B20 as well as on the M50B25 as a replacement for the following Bosch Motronics: 0 261...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M43 engines. The control unit can be used for the following Bosch Motronics: 0 261 203 276 0 261 203 277 0 261 203 447 0 261 203 660 0 261...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for M44 engines. The control unit can be used for the following Bosch Motronic: 0 261 203 667 If your number not listed, please contact us,...
From €499.00 *
The kdFi V1.4 is installed in a Motronic compatible housing and loaded with an initial setup for S38B38 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal with...
From €499.00 *
The kdFi V1.4 is installed in a Siemens compatible enclosure and loaded with an initial setup for M52 engines. The control unit can be used on the M52B20, M52B25 as well as on the M52B28 as a replacement for the following DME Siemens:...
From €499.00 *
The kdFi V1.4 is installed in a powder-coated Motronic housing and loaded with an initial setup for M20 engines. This ECU can be used on M20B20 and M20B25 engines as replacement for Bosch Motronic: 0 261 200 152 0 261 200 153 0 261 200...
From €499.00 *
The kdFi V1.4 is installed in a powder-coated Motronic housing and loaded with an initial setup for M30 engines. The control unit can be used for the following Bosch Motronics: 0 261 200 150 0 261 200 151 0 261 200 178 0 261 200 179 If...
From €499.00 *
The kdFi V1.4 is installed in a powder-coated Motronic housing and loaded with an initial setup for S38B36 engines. Customer to do: - Replace Throttle Position Switch with Throttle Position Sensor e.g. from M50 engine (not included in...
From €499.00 *
The kdFi V1.4 is installed in a powder-coated Motronic housing and loaded with an initial setup for M40 engines. (not for the E36 with 88-pin control unit) The control unit can be used on the following Bosch Motronics: 0 261 200 157 0...
From €499.00 *
Viewed