Products from k-data

Close filters
 
from to
1 From 4
No results were found for the filter!
UAB BMW M50 UAB BMW M50
Universal adapter board for the BMW M50 engine with an 88-pin connector suitable for the engine wiring harness. The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3. A boot loader is loaded on the...
€680.00 *
UAB BMW M50TU UAB BMW M50TU
Universal adapter board for the BMW M50TU engine with an 88-pin connector suitable for the engine wiring harness. The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3. A boot loader is loaded on the...
€680.00 *
UAB BMW M52 UAB BMW M52
Universal adapter board for the BMW M52 engine with an 88-pin connector suitable for the engine wiring harness. The board contains a powerful Motorola 9S12XEP100 which is also used in the Megasquirt 3. A boot loader is loaded on the...
€680.00 *
Lambda Sensor LSU 4.2 Lambda Sensor LSU 4.2
Wideband Lambda Sensor LSU 4.2 - used with integrated kdFi V1.4 Lambdacontroller
€84.95 *
kdFi V1.4 plug set Cinch kdFi V1.4 plug set Cinch
Plug Set for kdFi V1.4 with housing
€24.90 *
kdFi V1.4 plug set PNP kdFi V1.4 plug set PNP
Plug set for kdFi V1.4 PNP engine control units
€9.00 *
kdFi V1.4 PNP VW ABV (VR6) kdFi V1.4 PNP VW ABV (VR6)
The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for VR6 ABV engines with wasted spark. (can also be used for AAA with coil pack) It is usable for both the 2.8l and 2.9l, with the ignition block for...
From €499.00 *
kdFi V1.4 PNP BMW M44 kdFi V1.4 PNP BMW M44
The kdFi V1.4 is mounted and wired in a Motronic compatible housing and loaded with an initial setup for M44 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup The control unit can be used for the...
From €499.00 *
kdFi V1.4 PNP BMW S38B38 kdFi V1.4 PNP BMW S38B38
The kdFi V1.4 is mounted and wired in a Motronic compatible housing and loaded with an initial setup for S38B38 engines. Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product is only street legal...
From €499.00 *
kdFi V1.4 PNP BMW S38B36 kdFi V1.4 PNP BMW S38B36
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for S38B36 engines. Customer to do: - Replace Throttle Position Switch with Throttle Position Sensor e.g. from M50 engine (not included in...
From €499.00 *
kdFi V1.4 PNP Opel C20XE kdFi V1.4 PNP Opel C20XE
The kdFi V1.4 is mounted and wired in a Motronic housing and loaded with an initial setup for C20XE engines. (Motronik 2.8 without distributor) Customer to do: - Change Engine Management - START ENGINE ! - do your own setup This product...
From €499.00 *
kdFi V1.4 PNP VW PY (G40) kdFi V1.4 PNP VW PY (G40)
The kdFi V1.4 is mounted and wired in a VW housing and loaded with an initial setup for G40 (PY) engines. The MAP sensor is good up to 1,5 bar boost and can be replaced by a 3 bar sensor if needed. Customer to do: - Change Engine...
From €499.00 *
1 From 4
Viewed